{"title":"Motocross and Enduro Helmets","description":"\u003cp\u003eModel-specific camera mounts for motocross and enduro helmets. The mount fits the chin of your helmet precisely and stays firmly in place off-road too. It comes with a camera adapter, J-hook, short and long extension arm, screws, safety tether and alcohol wipe. 100% fit guarantee and 5-year warranty.\u003c\/p\u003e","products":[{"product_id":"shoei-fmx-wr","title":"Shoei VFX-WR Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Shoei VFX-WR helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Shoei VFX-WR. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Shoei models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/shoei\"\u003eShoei Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eShoei VFX-WR\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Shoei VFX-WR chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Shoei VFX-WR helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815793807702,"sku":"RMG-SHO-VFXWR","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/2E5AA8BC-1D7B-42AC-888F-7422F379E580.png?v=1785047116"},{"product_id":"shoei-v-moto-mount","title":"Shoei V Moto Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Shoei V Moto helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Shoei V Moto. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Shoei models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/shoei\"\u003eShoei Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eShoei V Moto\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Shoei V Moto chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Shoei V Moto helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815794561366,"sku":"RMG-SHO-VMOTO","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/IMG_9584.png?v=1785047134"},{"product_id":"airoh-stealht-senior","title":"Airoh Stealth Senior Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Stealth Senior helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Stealth Senior. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Stealth Senior\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Stealth Senior chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Stealth Senior helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815798165846,"sku":"RMG-AIR-STEALTHSENIOR","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/IMG_9606.png?v=1785047198"},{"product_id":"scorpion-vx-16-mount","title":"Scorpion VX-16 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Scorpion VX-16 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Scorpion VX-16. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Scorpion models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/scorpion\"\u003eScorpion Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eScorpion VX-16\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Scorpion VX-16 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Scorpion VX-16 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815799771478,"sku":"RMG-SCO-VX16","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsApp_Image_2026-01-10_at_10.58.50_1.png?v=1785047235"},{"product_id":"airoh-twist-3-mount","title":"Airoh Twist 3 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Twist 3 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Twist 3. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Twist 3\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Twist 3 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Twist 3 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815813566806,"sku":"RMG-AIR-TWIST3","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/101B13CE-E6A8-4138-8DF7-0FF62C0FD3EB.png?v=1785047473"},{"product_id":"arai-mx-v-evo-mount","title":"Arai MX-V Evo Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Arai MX-V Evo helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Arai MX-V Evo. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Arai models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/arai\"\u003eArai Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eArai MX-V Evo\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Arai MX-V Evo chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Arai MX-V Evo helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815815500118,"sku":"RMG-ARA-MXVEVO","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/EA170398-D6E3-4D81-AFBC-8F5EF975D545.png?v=1785047547"},{"product_id":"bell-moto-r-mount","title":"Bell Moto-R Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Bell Moto-R helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Bell Moto-R. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Bell models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/bell\"\u003eBell Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eBell Moto-R\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Bell Moto-R chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Bell Moto-R helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815816843606,"sku":"RMG-BEL-MOTOR","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsAppImage2026-02-23at23.38.41.png?v=1785047620"},{"product_id":"airoh-strycker","title":"Airoh Strycker Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Strycker helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Strycker. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Strycker\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Strycker chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Strycker helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815816909142,"sku":"RMG-AIR-STRYCKER","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/3B44E005-FC02-41B4-8172-22984A2C0B61.png?v=1785047629"},{"product_id":"hjc-rpha-x","title":"HJC RPHA X Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the HJC RPHA X helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e HJC RPHA X. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther HJC models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/hjc\"\u003eHJC Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eHJC RPHA X\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the HJC RPHA X chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the HJC RPHA X helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815818776918,"sku":"RMG-HJC-RPHAX","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/36CC790C-40A7-4F4A-8425-27AD380BC42A.png?v=1785047638"},{"product_id":"airoh-twist-mount","title":"Airoh Twist Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Twist helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Twist. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Twist\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Twist chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Twist helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815819596118,"sku":"RMG-AIR-TWIST","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/386B0ABC-8F76-423E-8604-574C8E4540A1.png?v=1785047655"},{"product_id":"thor-quadrant-pro-circuit-mount","title":"Thor Quadrant Pro Circuit Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Thor Quadrant Pro Circuit helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Thor Quadrant Pro Circuit. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Thor models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/thor\"\u003eThor Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eThor Quadrant Pro Circuit\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Thor Quadrant Pro Circuit chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Thor Quadrant Pro Circuit helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815819727190,"sku":"RMG-THO-QUADRANTPROCIR","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/52DBA7BE-BC48-4786-9544-A1F393998167.png?v=1785047672"},{"product_id":"fxr-atr-3-mount","title":"FXR ATR-3 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the FXR ATR-3 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e FXR ATR-3. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther FXR models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/fxr\"\u003eFXR Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eFXR ATR-3\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the FXR ATR-3 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the FXR ATR-3 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815821922646,"sku":"RMG-FXR-ATR3","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsAppImage2026-02-28at14.35.49_a859748d-ebae-4b1e-ad93-fd034a86e395.png?v=1785047731"},{"product_id":"nolan-n53","title":"Nolan N53 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Nolan N53 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Nolan N53. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Nolan models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/nolan\"\u003eNolan Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eNolan N53\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Nolan N53 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Nolan N53 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815823036758,"sku":"RMG-NOL-N53","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/A547735F-574B-470E-B2DB-7C0A433ABDA8.png?v=1785047766"},{"product_id":"airoh-wraap-mount","title":"Airoh Wraaap Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Wraaap helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Wraaap. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Wraaap\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Wraaap chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Wraaap helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815826215254,"sku":"RMG-AIR-WRAAAP","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/34114E2A-3405-443E-8745-82BCEB3454F4.png?v=1785047881"},{"product_id":"raven-ipsum-evo-mount","title":"Raven Ipsum Evo Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Raven Ipsum Evo helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Raven Ipsum Evo. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Raven models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/raven\"\u003eRaven Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eRaven Ipsum Evo\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Raven Ipsum Evo chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Raven Ipsum Evo helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815826346326,"sku":"RMG-RAV-IPSUMEVO","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/6948AF5D-FBD5-4120-A15B-46A5855507FA.png?v=1785047900"},{"product_id":"raven-airborne","title":"Raven Airborne Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Raven Airborne helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Raven Airborne. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Raven models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/raven\"\u003eRaven Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eRaven Airborne\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Raven Airborne chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Raven Airborne helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815826674006,"sku":"RMG-RAV-AIRBORNE","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/FA91339E-286F-4A84-80F6-65B328E62EDA.png?v=1785047936"},{"product_id":"o-neal-2srs-mount","title":"O'Neal 2SRS Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the O'Neal 2SRS helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e O'Neal 2SRS. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther O’Neal models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/o-neal\"\u003eO’Neal Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eO'Neal 2SRS\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the O'Neal 2SRS chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the O'Neal 2SRS helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815827624278,"sku":"RMG-ONE-2SRS","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/93DDD6C9-9294-4337-A6D1-BF799930BEA4.png?v=1785048031"},{"product_id":"scorpion-vx-22-air-mount","title":"Scorpion VX-22 Air Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Scorpion VX-22 Air helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Scorpion VX-22 Air. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Scorpion models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/scorpion\"\u003eScorpion Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eScorpion VX-22 Air\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Scorpion VX-22 Air chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Scorpion VX-22 Air helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815828181334,"sku":"RMG-SCO-VX22AIR","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/7B31CF29-24CD-440D-B277-4EE9A454647D.png?v=1785048082"},{"product_id":"scorpion-vx-16-evo-air-mount","title":"Scorpion VX-16 Evo Air Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Scorpion VX-16 Evo Air helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Scorpion VX-16 Evo Air. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Scorpion models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/scorpion\"\u003eScorpion Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eScorpion VX-16 Evo Air\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Scorpion VX-16 Evo Air chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Scorpion VX-16 Evo Air helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815828279638,"sku":"RMG-SCO-VX16EVOAIR","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsApp_Image_2026-01-10_at_10.58.50_1_98ede84a-0453-45bc-adf0-af3704060c28.png?v=1785048092"},{"product_id":"leatt-gpx-5-5-composite-v19-1-kypara-kamera-kiinnike","title":"Leatt GPX 5.5 Composite V19.1 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Leatt GPX 5.5 Composite V19.1 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Leatt GPX 5.5 Composite V19.1. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Leatt models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/leatt\"\u003eLeatt Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eLeatt GPX 5.5 Composite V19.1\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Leatt GPX 5.5 Composite V19.1 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Leatt GPX 5.5 Composite V19.1 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815829852502,"sku":"RMG-LEA-GPX55COMPOSITE","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsAppImage2026-04-14at23.36.13.jpg?v=1785048108"},{"product_id":"ixs-363-kypara-kamera-kiinnike","title":"iXS 363 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the iXS 363 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e iXS 363. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther iXS models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/ixs\"\u003eiXS Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eiXS 363\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the iXS 363 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the iXS 363 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815830147414,"sku":"RMG-IXS-363","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsAppImage2026-04-14at23.38.14.jpg?v=1785048115"},{"product_id":"fly-racing-formula-mount","title":"Fly Racing Formula Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Fly Racing Formula helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Fly Racing Formula. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther FLY Racing models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/fly\"\u003eFLY Racing Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eFly Racing Formula\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Fly Racing Formula chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Fly Racing Formula helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815831753046,"sku":"RMG-FLY-FORMULA","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsAppImage2026-04-23at22.03.05.png?v=1785048160"},{"product_id":"ls2-subverter-evo","title":"LS2 Subverter Evo Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the LS2 Subverter Evo helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e LS2 Subverter Evo. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther LS2 models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/ls2\"\u003eLS2 Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eLS2 Subverter Evo\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the LS2 Subverter Evo chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the LS2 Subverter Evo helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815837126998,"sku":"RMG-LS2-SUBVERTEREVO","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/61BED6A0-16A6-44A7-99AE-461969DE37DC.jpg?v=1785048184"},{"product_id":"ls2-subverter-evo-1","title":"LS2 Fast II Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the LS2 Fast II helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e LS2 Fast II. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther LS2 models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/ls2\"\u003eLS2 Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eLS2 Fast II\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the LS2 Fast II chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the LS2 Fast II helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815837225302,"sku":"RMG-LS2-FAST2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/7D796715-98B6-4289-B516-08B7F360417B.jpg?v=1785048193"},{"product_id":"airoh-twist-2","title":"Airoh Twist 2 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Twist 2 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Twist 2. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Twist 2\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Twist 2 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Twist 2 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815837290838,"sku":"RMG-AIR-TWIST2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/163F9F4D-B105-474C-A272-122AA3D6B082.jpg?v=1785048201"},{"product_id":"airoh-aviator-3","title":"Airoh Aviator 3 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Aviator 3 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Aviator 3. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Aviator 3\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Aviator 3 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Aviator 3 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815838175574,"sku":"RMG-AIR-AVIATOR3","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/455C85C8-7567-4F10-BAE9-6D51900F26BC.jpg?v=1785048266"},{"product_id":"alpinestars-supertech-m8-1","title":"Alpinestars Supertech M8 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Alpinestars Supertech M8 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Alpinestars Supertech M8. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Alpinestars models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/alpinestars\"\u003eAlpinestars Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAlpinestars Supertech M8\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Alpinestars Supertech M8 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Alpinestars Supertech M8 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815838306646,"sku":"RMG-ALP-SUPERTECHM8","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/fe6c6cb1-b89f-480f-8ccc-b745095a90a6.jpg?v=1785048282"},{"product_id":"fxr-atr-3-mount-taydellinen-paketti-kopio","title":"6D ATR-3X Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the 6D ATR-3X helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e 6D ATR-3X. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther 6D models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/6d\"\u003e6D Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003e6D ATR-3X\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the 6D ATR-3X chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the 6D ATR-3X helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815839027542,"sku":"RMG-6D-ATR3X","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/WhatsAppImage2026-02-28at14.35.49.png?v=1785048357"}],"url":"https:\/\/rmgear.fi\/en-eu\/collections\/motocross-ja-enduro-kyparat.oembed?page=2","provider":"RM Gear","version":"1.0","type":"link"}