{"title":"Adventure Helmets","description":"\u003cp\u003eModel-specific camera mounts for adventure and dual sport helmets, made for riding both on and off the road. Each mount comes with a camera adapter, J-hook, short and long extension arm, screws, safety tether and alcohol wipe. 100% fit guarantee and 5-year warranty.\u003c\/p\u003e","products":[{"product_id":"ls2","title":"LS2 Explorer Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the LS2 Explorer helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e LS2 Explorer. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther LS2 models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/ls2\"\u003eLS2 Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eLS2 Explorer\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the LS2 Explorer chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the LS2 Explorer helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815793414486,"sku":"RMG-LS2-EXPLORER","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/67191F11-F239-47B2-8528-665E77B2FD3F.png?v=1785047099"},{"product_id":"scorpion-adf-9000","title":"Scorpion ADF-9000 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Scorpion ADF-9000 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Scorpion ADF-9000. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Scorpion models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/scorpion\"\u003eScorpion Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eScorpion ADF-9000\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Scorpion ADF-9000 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Scorpion ADF-9000 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815793480022,"sku":"RMG-SCO-ADF9000","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/49BE08EE-C8E8-42EC-AFFE-5AF97B0C7E09.png?v=1785047107"},{"product_id":"chuberth-e2-mount","title":"Schuberth E2 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Schuberth E2 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Schuberth E2. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Schuberth models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/schuberth\"\u003eSchuberth Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eSchuberth E2\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Schuberth E2 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Schuberth E2 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815802589526,"sku":"RMG-SCH-E2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/3262D269-E44D-4998-97F8-0B5207919F2F.png?v=1785047295"},{"product_id":"ls2-pioneer-ii-mount","title":"LS2 Pioneer II Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the LS2 Pioneer II helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e LS2 Pioneer II. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther LS2 models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/ls2\"\u003eLS2 Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eLS2 Pioneer II\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the LS2 Pioneer II chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the LS2 Pioneer II helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815813402966,"sku":"RMG-LS2-PIONEER2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/5C3D987F-1395-4C4C-AEEE-7F9F78B95F4C.png?v=1785047456"},{"product_id":"airoh-commander-2-mount","title":"Airoh Commander 2 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Airoh Commander 2 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Airoh Commander 2. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Airoh models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/airoh\"\u003eAiroh Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eAiroh Commander 2\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Airoh Commander 2 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Airoh Commander 2 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815813763414,"sku":"RMG-AIR-COMMANDER2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/C7436DE1-A23B-4D41-8917-2D0780206C8B.png?v=1785047482"},{"product_id":"nexx-x-lifecountry","title":"Nexx X.Lifecountry Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Nexx X.Lifecountry helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Nexx X.Lifecountry. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther NEXX models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/nexx\"\u003eNEXX Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eNexx X.Lifecountry\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Nexx X.Lifecountry chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Nexx X.Lifecountry helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815823987030,"sku":"RMG-NEX-XLIFECOUNTRY","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/IMG-4588.png?v=1785047786"},{"product_id":"scorpion-adx-1","title":"Scorpion ADX-1 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Scorpion ADX-1 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Scorpion ADX-1. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Scorpion models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/scorpion\"\u003eScorpion Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eScorpion ADX-1\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Scorpion ADX-1 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Scorpion ADX-1 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815824380246,"sku":"RMG-SCO-ADX1","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/EB7D9DE2-BD43-4F38-8C5A-CD5877BD624C.png?v=1785047831"},{"product_id":"nexx-x-rally-pro","title":"Nexx X.Rally Pro Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Nexx X.Rally Pro helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Nexx X.Rally Pro. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther NEXX models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/nexx\"\u003eNEXX Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eNexx X.Rally Pro\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Nexx X.Rally Pro chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Nexx X.Rally Pro helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815824707926,"sku":"RMG-NEX-XRALLYPRO","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/0066B3C0-D86A-4B7A-AB2C-A291C3BC4FC0.png?v=1785047866"},{"product_id":"course-adventurer-2-0-mount","title":"Course Adventurer 2.0 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Course Adventurer 2.0 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Course Adventurer 2.0. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Course models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/course\"\u003eCourse Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eCourse Adventurer 2.0\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Course Adventurer 2.0 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Course Adventurer 2.0 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815826510166,"sku":"RMG-COU-ADVENTURER20","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/60ED495B-EED9-4007-BBDE-97C4D091DCF5.png?v=1785047918"},{"product_id":"course-drift-mount","title":"Course Drift Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Course Drift helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Course Drift. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Course models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/course\"\u003eCourse Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eCourse Drift\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Course Drift chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Course Drift helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815826739542,"sku":"RMG-COU-DRIFT","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/4BB10F44-993B-4602-8A1B-199766D45024.png?v=1785047946"},{"product_id":"shoei-hornet-adv-mount","title":"Shoei Hornet ADV Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Shoei Hornet ADV helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Shoei Hornet ADV. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Shoei models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/shoei\"\u003eShoei Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eShoei Hornet ADV\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Shoei Hornet ADV chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Shoei Hornet ADV helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815828050262,"sku":"RMG-SHO-HORNETADV","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/39CC0FEF-038B-45B0-AEA9-5AAF13F3C8F1.png?v=1785048066"},{"product_id":"ixs-208-mount","title":"iXS 208 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the iXS 208 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e iXS 208. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther iXS models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/ixs\"\u003eiXS Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eiXS 208\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the iXS 208 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the iXS 208 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815828115798,"sku":"RMG-IXS-208","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/038A6191-F07D-49CD-AF14-A000544CFB7A.jpg?v=1785048074"},{"product_id":"scorpion-adx-2-mount","title":"Scorpion ADX-2 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the Scorpion ADX-2 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e Scorpion ADX-2. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther Scorpion models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/scorpion\"\u003eScorpion Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eScorpion ADX-2\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the Scorpion ADX-2 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the Scorpion ADX-2 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815830507862,"sku":"RMG-SCO-ADX2","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/F9707CBC-1098-41D5-A073-54EABEBC478A.jpg?v=1785048149"},{"product_id":"bmw-gs-pure-airoh-commander-1","title":"BMW GS Pure \/ Airoh Commander 1 Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the BMW GS Pure \/ Airoh Commander 1 helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e BMW GS Pure \/ Airoh Commander 1. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther BMW models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/bmw\"\u003eBMW Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eBMW GS Pure \/ Airoh Commander 1\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the BMW GS Pure \/ Airoh Commander 1 chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the BMW GS Pure \/ Airoh Commander 1 helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815838241110,"sku":"RMG-BMW-GSPURE","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/efcd52e8-c7b9-4c1e-8e15-26536651568b.jpg?v=1785048274"},{"product_id":"bmw-gs-carbon-evo","title":"BMW GS Carbon Evo Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the BMW GS Carbon Evo helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e BMW GS Carbon Evo. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther BMW models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/bmw\"\u003eBMW Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eBMW GS Carbon Evo\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the BMW GS Carbon Evo chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the BMW GS Carbon Evo helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":54815838470486,"sku":"RMG-BMW-GSCARBONEVO","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/dc22d22b-68fb-4c01-9d21-ed12fbacaf2d.jpg?v=1785048298"},{"product_id":"bmw-gs-rallye","title":"BMW GS Rallye Helmet Camera Mount","description":"\u003cp\u003e\u003cstrong\u003eComplete kit – everything included at no extra cost.\u003c\/strong\u003e Model-specific chin camera mount for the BMW GS Rallye helmet. In addition to the helmet-specific mount, the package includes a camera adapter, J-hook adapter, short and long extension arms, screws, a safety tether and an alcohol wipe. Many other brands sell these parts separately, even though without them you cannot adjust the camera angle and the camera would end up filming your toes. 100% fit guarantee. \u003cem\u003eInsta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCompatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eHelmet:\u003c\/strong\u003e BMW GS Rallye. The mount is shaped for the chin area of this helmet model and is not a universal mount for other helmets.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCameras:\u003c\/strong\u003e GoPro, DJI and other action cameras with a standard mount. Insta360 cameras also require the \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eInsta360 adapter\u003c\/a\u003e, sold separately.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eOther BMW models:\u003c\/strong\u003e see all \u003ca href=\"\/en\/collections\/bmw\"\u003eBMW Helmet Camera Mounts\u003c\/a\u003e.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eRM Gear helmet-specific mount with 3M VHB tape pre-applied\u003c\/li\u003e\u003cli\u003eCamera adapter (quick-release buckle)\u003c\/li\u003e\u003cli\u003eJ-hook adapter\u003c\/li\u003e\u003cli\u003eShort and long extension arm\u003c\/li\u003e\u003cli\u003eScrews\u003c\/li\u003e\u003cli\u003eSafety tether\u003c\/li\u003e\u003cli\u003eAlcohol wipe\u003c\/li\u003e\u003cli\u003eInstallation instructions\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\u003ctable\u003e\u003cthead\u003e\u003ctr\u003e\u003cth\u003eSpecification\u003c\/th\u003e\u003cth\u003eDetails\u003c\/th\u003e\u003c\/tr\u003e\u003c\/thead\u003e\u003ctbody\u003e\u003ctr\u003e\u003ctd\u003eCompatible helmet\u003c\/td\u003e\u003ctd\u003eBMW GS Rallye\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting position\u003c\/td\u003e\u003ctd\u003eHelmet chin\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMounting method\u003c\/td\u003e\u003ctd\u003e3M VHB tape pre-attached, no drilling\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eCameras\u003c\/td\u003e\u003ctd\u003eGoPro, DJI and other action cameras with a standard mount (Insta360: \u003ca href=\"\/en\/products\/insta360-adapter\"\u003eadapter\u003c\/a\u003e sold separately)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMaterial\u003c\/td\u003e\u003ctd\u003eCarbon-fibre-reinforced composite\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eMade in\u003c\/td\u003e\u003ctd\u003eFinland\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eWarranty\u003c\/td\u003e\u003ctd\u003e5 years (mounting tape 2 years)\u003c\/td\u003e\u003c\/tr\u003e\u003ctr\u003e\u003ctd\u003eFit guarantee\u003c\/td\u003e\u003ctd\u003e100%\u003c\/td\u003e\u003c\/tr\u003e\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eFeatures and benefits\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003eModel-specific fit:\u003c\/strong\u003e the mount follows the shape of the BMW GS Rallye chin area, so the camera stays firmly in place and your footage stays steady.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eCarbon-fibre reinforced material:\u003c\/strong\u003e a lightweight yet strong technical composite that puts no strain on the helmet.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eWeatherproof:\u003c\/strong\u003e UV light, rain, mud and temperatures from freezing cold to summer heat do not weaken or deform the mount.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eNo drilling:\u003c\/strong\u003e the 3M VHB tape is pre-applied to the mount in the right shape, so the helmet does not need to be modified.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eAdjustable angle:\u003c\/strong\u003e the extension arms and J-hook let you set the camera at exactly the right angle.\u003c\/li\u003e\u003cli\u003e\u003cstrong\u003eDesigned and made in Finland.\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003col\u003e\u003cli\u003eTest where the mount fits best on the chin area of the BMW GS Rallye helmet.\u003c\/li\u003e\u003cli\u003eClean the helmet’s chin area using the alcohol wipe included in the package.\u003c\/li\u003e\u003cli\u003eRemove the red protective film from the tape and gently warm the adhesive, for example with a hair dryer.\u003c\/li\u003e\u003cli\u003ePress the mount onto the helmet’s chin area with light pressure and let it set undisturbed for 24 hours.\u003c\/li\u003e\u003cli\u003eAttach the camera to the adapter and adjust the angle with the extension arms – show the world how you do it.\u003c\/li\u003e\u003c\/ol\u003e\u003cp\u003eCheck that the mount is secure before every ride. We recommend replacing the 3M tape about every two years – \u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003ereplacement tape\u003c\/a\u003e is available in our store.\u003c\/p\u003e\u003cp\u003eSee also our \u003ca href=\"\/en\/blogs\/oppaat\/kyparakameran-kiinnikkeen-asennus\"\u003estep-by-step installation guide\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWarranty and safety\u003c\/h2\u003e\u003cp\u003eHelmet mounts come with a \u003cstrong\u003e5-year warranty\u003c\/strong\u003e covering manufacturing and material defects, plus our \u003cstrong\u003e100% fit guarantee\u003c\/strong\u003e: if the mount does not fit your helmet, you get your money back. The mounting tape has a 2-year warranty. The warranty does not cover normal wear, incorrect installation, misuse or external damage.\u003c\/p\u003e\u003cp\u003eThe mount is not personal protective equipment and is not an accessory approved by the helmet manufacturer. Install it according to the instructions and use it at your own risk in line with local laws.\u003c\/p\u003e\u003ch2\u003eAccessories\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-vertical-mount\"\u003eVertical Mount\u003c\/a\u003e – camera in portrait position for vertical video\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/rm-gear-extension-kit\"\u003eExtension Kit\u003c\/a\u003e – extra extension arms\u003c\/li\u003e\u003cli\u003e\u003ca href=\"\/en\/products\/3m-kiinnitysteippi-mounteille\"\u003e3M mounting tape\u003c\/a\u003e – replacement tape for the mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"RM Gear","offers":[{"title":"Default Title","offer_id":55514880803158,"sku":"RMG-BMW-GSRALLYE","price":39.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0976\/8714\/2742\/files\/53FEED30-74F8-4DAB-8BF5-594112AD6203.jpg?v=1790538081"}],"url":"https:\/\/rmgear.fi\/en-eu\/collections\/adventure-kyparat.oembed","provider":"RM Gear","version":"1.0","type":"link"}